Manufacturing · Service line 09
Authorised Sika Dealer
In brief
Zahan İnşaat is an authorised Sika® dealer and applicator in Atakum, Samsun. Its 62-product catalogue covers repair and grout mortars, bituminous membranes and coatings, liquid roofing membranes, wet-area waterproofing, injection resins, floor coatings, chemical anchors, adhesives and joint sealants. Because it applies the same systems on its own sites, it provides technical support on product selection and on site.
- Product groups
- 10
- Products
- 62
- Sales office
- Atakum / Samsun
- Phone
- 0544 871 81 33
A construction chemical only delivers the performance printed on the tin as part of the right system and with the right application. Most of the problems we see on site come not from product quality but from a mismatched primer, an incompatible resin or a miscalculated consumption rate.
At Zahan İnşaat we both sell Sika products and use them on our own sites. That double position changes what you can expect from a dealership: we do not hand you a product list, we propose a system suited to your job.
The main product groups we stock
We keep the items most needed on site ready in our Samsun warehouse:
- Waterproofing — liquid-applied, liquid and membrane systems, cementitious crystalline products
- Concrete repair — structural repair mortars, anti-corrosion primers, grout
- Anchoring and bonding — epoxy and hybrid anchor cartridges, structural adhesives
- Strengthening — carbon fibre fabric, laminates, saturating and bonding resins
- Joints and sealing — polyurethane sealants, joint tapes, expansion profiles
- Concrete admixtures — plasticisers, set retarders, curing compounds
What you can expect from the dealership
Not just a price list, but support for the decision:
- A system recommendation and product matching based on the detail
- Consumption and cost calculation per square metre or linear metre
- Supply of technical data sheets, Declarations of Performance (DoP) and safety data sheets
- Technical staff on site for the first application
- Fast delivery to Samsun and the surrounding provinces
What the scope covers
- Waterproofing products and concrete repair mortars
- Epoxy anchors, adhesives and joint products
- Carbon fibre and strengthening chemicals
- Product selection and site application advice
Sika® product catalogue
Sika products: technical data and areas of use
Every product in our printed catalogue is listed below. For stock, prices and delivery, call our sales office or use the button on a product card to ask on WhatsApp.
Which Sika product for which job?
A quick selection table compiled from the areas of use in our catalogue. We make the final choice with you, based on the substrate and site conditions.
Product group 01 · 6 products
Repair mortars
Repair, protect and extend the service life of reinforced-concrete structures with Sika’s high-performance repair mortars. Reinforcement protection, structural and non-structural repair solutions under one roof.
Sika MonoTop®-610 · Sika MonoTop®-612 · Sika MonoTop®-620 · SikaEmaco® N 600 · SikaEmaco® S 488 · Sikadur®-31
Sika MonoTop®-610
Reinforcement Protection and Bonding Mortar
Key features
- Protects reinforcement against corrosion
- Bonds to concrete and sound substrates
- Prevents water and chloride penetration
- Applied by brush, roller or spray
Technical data
| Water | 4.25–4.75 L / 25 kg |
|---|---|
| Consumption | ~1.5–2.0 kg/m² |
| Layer thickness | ~1 mm |
| Standard | EN 1504-7 |
Areas of use
- Reinforcement protection
- Bonding bridge
- Preparation before concrete repair
Sika MonoTop®-612
Class R4 Structural Repair Mortar
Key features
- High-strength repair mortar
- Suitable for vertical and overhead application
- 5–30 mm in a single layer
- Applied by spray or trowel
Technical data
| Water | 2.75–3.25 L / 25 kg |
|---|---|
| Consumption | 17–20 kg/m² (per 1 cm) |
| Layer thickness | 5–30 mm |
| Compressive strength | 1 day 10–35 / 28 days 50–85 N/mm² |
| Standard | EN 1504-3 R4 |
Areas of use
- Structural concrete repair
- Column and beam repair
- Vertical and soffit applications
Sika MonoTop®-620
Class R3 Repair / Levelling / Finishing Mortar
Key features
- Gives a fine finish on rough surfaces
- Suitable for thin-layer application
- Ideal surface preparation before coatings
- For indoor and outdoor use
Technical data
| Water | 4.75–5.0 L / 25 kg |
|---|---|
| Consumption | 1.5–2.0 kg/m²/mm |
| Layer thickness | 1.5–5 mm |
| Standard | EN 1504-3 R3 |
Areas of use
- Surface levelling / finishing
- Pore sealing
- Preparation before paint or coating
SikaEmaco® N 600
Non-Structural Repair Mortar
Key features
- Suitable for surface repairs
- Gives a smooth, even finish
- High adhesion
- Mixed with water only
Technical data
| Water | 4.5 L / 20 kg |
|---|---|
| Layer thickness | 5–30 mm |
| Standard | EN 1504-3 R1 |
Areas of use
- Non-structural surface repair
- Plaster and concrete surface repair
- Minor repair work
SikaEmaco® S 488
Class R4 Structural Repair Mortar
Key features
- Thixotropic and shrinkage-free
- High strength for structural repairs
- Applied by trowel or spray
- For indoor and outdoor use
Technical data
| Water | 3.75–4.0 L / 25 kg |
|---|---|
| Consumption | ~1.92 kg/m²/mm |
| Layer thickness | 10–50 mm |
| Standard | EN 1504-3 R4 |
Areas of use
- Structural concrete repair
- Thick-layer repairs
- Vertical and soffit applications
Sikadur®-31
Epoxy Adhesive and Repair Mortar
Key features
- 2-component thixotropic epoxy system
- High adhesion and strength
- Suitable for vertical and overhead application
- For concrete, stone and metal surfaces
Technical data
| Packaging | A+B = 6 kg set |
|---|---|
| Composition | Epoxy-based |
| Use | Bonding and local repair |
| Type | Thixotropic |
Areas of use
- Structural bonding
- Local concrete repair
- Metal and stone fixing
Product group 02 · 6 products
Grouts and epoxy grouts
The SikaGrout® range delivers high strength, excellent flowability and superior bond, from machine foundations to anchoring applications. Epoxy-based grouts provide maximum performance in demanding environments.
SikaGrout®-212 · SikaGrout®-340 · SikaGrout®-928 · SikaGrout®-9400 · Sikadur®-42 T · SikaFlow®-648
SikaGrout®-212
Cementitious Grout
Key features
- Easy to apply
- Excellent flowability
- High compressive strength
- Non-shrink
- Indoor and outdoor use
Technical data
| Compressive str. (EN 12190) | 1 day 30–50 / 28 days 60–90 N/mm² |
|---|---|
| Flexural str. | 1 day ~6 / 28 days ~10 N/mm² |
| Application thickness | 10–75 mm |
| Mixing ratio | 25 kg powder / 2.75–3.25 L water |
| Colour | Grey |
| Packaging | 25 kg bag |
Areas of use
- Machine foundations
- Under steel column base plates
- Void filling
- Concrete repair
- Anchoring
SikaGrout®-340
High-Strength Grout
Key features
- High early strength
- Shrinkage-compensated
- Flowable consistency
- Pumpable
- 10–300 mm thickness
Technical data
| Compressive str. | 1 day ~50 / 7 days ~80 / 28 days ~95 MPa |
|---|---|
| Flexural str. | 1 day ~9 / 28 days ~20 MPa |
| Application thickness | 10–300 mm |
| Mixing ratio | 25 kg powder / 2.8–3.25 L water |
| Colour | Grey |
| Packaging | 25 kg bag |
Areas of use
- Heavy machinery and equipment foundations
- Base plates
- Precast element installation
- Void and cavity filling
- Anchoring
SikaGrout®-928
Non-Shrink High-Strength Grout
Key features
- Non-shrink
- Excellent flowability
- High bond
- Watertight
- Suitable for pumping
Technical data
| Compressive str. (EN 12190) | 28 days (+21 °C) ≥ 60 MPa |
|---|---|
| Restrained shrinkage/expansion | ≥ 2.0 MPa |
| Tensile bond (EN 1542) | ≥ 2.0 MPa |
| Application thickness | 10–80 mm |
| Mixing ratio | 25 kg powder / ~4.0 L water |
| Pot life (20 °C) | ~45 minutes |
| Colour / Packaging | Grey / 25 kg bag |
Areas of use
- Machine and equipment installation
- Base plates
- Structural infill
- Anchor bolt and rebar anchoring
- Void-free load transfer
SikaGrout®-9400
Wind Turbine Grout
Key features
- High flowability
- High strength
- Non-shrink
- Special formulation for wind turbine foundations
Technical data
| Compressive str. (EN 12190) | 1 day ~70 / 28 days ~110 MPa |
|---|---|
| Flexural str. (EN 196-1) | 1 day ~10 / 28 days ~25 MPa |
| Application thickness | 20–150 mm |
| Mixing ratio | 25 kg powder / 3.0–3.5 L water |
| Pot life (20 °C) | ~60 minutes |
| Colour / Packaging | Grey / 25 kg bag |
Areas of use
- Wind turbine foundations
- Bedding and anchoring
- Foundations under high load or vibration
- Large-volume infill
Sikadur®-42 T
3-Component Epoxy Resin Grout
Key features
- Solvent-free
- High flowability
- Non-shrink
- Fast curing
- High mechanical properties
- Indoor and outdoor use
Technical data
| Mixing ratio (A:B:C) | 2:1:12 by weight |
|---|---|
| Consumption | ~2 kg/m² (per 1 mm) |
| Layer thickness | Min 12 / Max 50 mm |
| Pot life (20 °C) | ~50 minutes |
| Compressive str. (1/14 days) | 60–80 / 80–100 N/mm² |
| Tensile bond | > 3.5 N/mm² (concrete) |
| Packaging | 15 kg set (A+B+C) |
Areas of use
- Machine foundations and equipment installation
- Anchors and studs
- Bearing plates and bridge bearings
- Crane rails
- Column fixings
SikaFlow®-648
High-Strength, Chemical-Resistant Epoxy Grout
Key features
- High early and final strength
- Flowable and pumpable
- Chemical resistance
- Low shrinkage
- Vibration and impact resistance
- Maximum performance in harsh environments
Technical data
| Mixing ratio (A:B) | 4-BAG (6.55:1) / 3-BAG (4.92:1) |
|---|---|
| Layer thickness | Min 12 / Max 150 mm |
| Pot life (21 °C) | ~90 minutes |
| Compressive str. (ASTM C579) | 7 days 100 MPa / post-cure 110 MPa |
| Shrinkage (ASTM C531) | 0.014 % |
| Packaging | 24.7 kg / 98.2 kg set |
Areas of use
- Heavy machine foundations
- Chemical plants
- Petrochemical and power plants
- High-vibration equipment installation
Product group 03 · 2 products
Bituminous waterproofing membranes
SikaShield® E65 S Pre EG and E67 S Pre EG membranes protect your structures from water for many years thanks to their robust build, high elasticity and flexibility at low temperatures. High-performance SBS-modified waterproofing membranes.
SikaShield® E65 S PRE EG · SikaShield® E67 S PRE EG
SikaShield® E65 S PRE EG
Single-Carrier (Polyester) SBS-Modified Waterproofing Membrane
Key features
- 3.5 / 4.0 / 4.5 mm thickness options
- High performance with a polyester carrier
- Flexible at low temperatures
- Torch-applied
- Suitable for multi-layer systems
Technical data
| Thickness | 3.5 / 4.0 / 4.5 mm |
|---|---|
| Carrier | Polyester |
| Flexibility (EN 1109) | -20 °C |
| Tensile str. (EN 12311-1) | ≥ 1000 N/50 mm |
| Elongation (EN 12311-1) | ≥ 40 % |
| Watertightness (EN 1928) | 60 kPa – 24 h (pass) |
| Reaction to fire | Class E |
| Surfaces | Top: silicon dioxide / Bottom: PP film |
Areas of use
- Basements and below-ground structures
- Basement walls
- Foundations and raft slabs
- Tunnels and retaining walls
- Terrace and roof systems (under protective screed)
SikaShield® E67 S PRE EG
Dual-Carrier (Polyester + Felt) SBS-Modified Waterproofing Membrane
Key features
- 4.5 mm thickness
- High mechanical strength with polyester + felt
- High dimensional stability
- Flexible at low temperatures
- Suitable for multi-layer systems
Technical data
| Thickness | 4.5 mm |
|---|---|
| Carrier | Polyester + felt |
| Flexibility (EN 1109) | -20 °C |
| Tensile str. (EN 12311-1) | ≥ 1200 N/50 mm |
| Elongation (EN 12311-1) | ≥ 50 % |
| Watertightness (EN 1928) | 60 kPa – 24 h (pass) |
| Reaction to fire | Class E |
| Surfaces | Top: silicon dioxide / Bottom: PP film |
Areas of use
- Basements and below-ground structures
- Basement walls
- Foundations and raft slabs
- Wet areas and water tanks
- Terrace and roof systems (under protective screed)
Product group 04 · 6 products
Bitumen-based waterproofing coatings
Protect your structures against water and moisture with Sika’s bitumen, rubber and polymer-based waterproofing products: long-lasting, reliable and high-performing.
Sika® Igasol® BC · Sika® Igolflex®-694 · Sika® Igolflex®-203 · Sika® Igolflex®-203 Spray TR · Sika® Igolflex®-645 · Sika® Igolflex®-110 N
Sika® Igasol® BC
Rubber-Bitumen Coating
Key features
- Single-component
- Water-based
- Economical and easy to apply
- Seamless, no joints
- Resistant to aggressive soils and contaminated groundwater
- Low odour
Technical data
| Chemical base | Bitumen-rubber blend |
|---|---|
| Packaging | 15 L pail |
| Colour | Dark brown (black when dry) |
| Density | ~1.00 kg/L (25 °C) |
| Solids content | ~39 ± 1 % |
| Watertightness | Pass (EN 15814) |
| Consumption | 0.25–0.50 kg/m² per coat, 2–3 coats |
Areas of use
- Foundation and basement walls
- Horizontal and vertical below-ground structures
- Retaining walls
Sika® Igolflex®-694
Polymer-Modified Rubber-Bitumen, Two-Component Waterproofing Coating
Key features
- Bridges shrinkage cracks thanks to its elastic behaviour
- Easy to use
- Long workability (long pot life)
- Easy application by trowel or brush
Technical data
| Chemical base | Bitumen-rubber / reactive powder |
|---|---|
| Packaging | 32 kg set (A 24 kg liquid + B 8 kg powder) |
| Colour | Liquid: dark brown-black / Powder: grey |
| Mixed density | ~1.05 kg/L |
| Watertightness | W2A (EN 15814) |
| Service temperature | -20 °C / +60 °C |
| Consumption | ~1.0–2.0 kg/m² per coat (min. ~3.0 kg/m²) |
| Pot life | ~1 hour |
Areas of use
- Foundation and basement walls
- Below-ground structures
- Wet areas (within a system)
Sika® Igolflex®-203
Two-Component Rubber-Bitumen and Cement-Based Waterproofing
Key features
- Does not sag on vertical surfaces
- Easy to use
- Can be applied to dry and slightly damp substrates
- W2A watertightness class (EN 15814)
Technical data
| Chemical base | Bitumen-rubber / reactive powder |
|---|---|
| Packaging | 32 kg set (A 24 kg liquid + B 8 kg powder) |
| Mixed density | ~1.05 kg/L |
| Watertightness | W2A (EN 15814) |
| Service temperature | -20 °C / +60 °C |
| Consumption | ~1.0–2.0 kg/m² per coat (min. ~3.0 kg/m²) |
| Pot life | ~1 hour |
Areas of use
- Foundation and basement walls
- Vertical below-ground structures
- Retaining walls
Sika® Igolflex®-203 Spray TR
Polymer-Modified Bitumen, Fibre-Reinforced, Two-Component Waterproofing
Key features
- Specially formulated for spray application
- High productivity and fast application
- Uniform coating on large areas
- Does not sag on vertical surfaces
Technical data
| Chemical base | Polymer-modified bitumen / reactive powder |
|---|---|
| Packaging | 32 kg set (A 26 kg liquid + B 8 kg powder) |
| Mixed density | ~1.05 kg/L |
| Class | EN 15814 W2A – CB2 – R2 |
| Service temperature | -20 °C / +60 °C |
| Consumption | ~1.0–3.0 kg/m² per coat (min. ~3.0 kg/m²) |
| Pot life | ~1 hour |
Areas of use
- Large-area foundation and basement walls
- Fast spray waterproofing
- Large construction sites
Sika® Igolflex®-645
Two-Component Rubber-Bitumen and Cement-Based Waterproofing
Key features
- Bridges shrinkage cracks thanks to its elastic behaviour
- Easy to use
- Long workability (long pot life)
- Easy application by trowel or brush
Technical data
| Chemical base | Bitumen-rubber / reactive powder |
|---|---|
| Packaging | 32 kg set (A 24 kg liquid + B 8 kg powder) |
| Mixed density | ~1.05 kg/L |
| Watertightness | W2A (EN 15814) |
| Service temperature | -20 °C / +60 °C |
| Consumption | ~1.0–2.0 kg/m² per coat (min. ~3.0 kg/m²) |
| Pot life | ~1 hour |
Areas of use
- Foundation and basement walls
- Below-ground structures
- Retaining walls
Sika® Igolflex®-110 N
Polymer-Filled Rubber-Bitumen, Single-Component Waterproofing
Key features
- Single-component
- Water-based
- Economical and easy to apply
- Can be applied to horizontal and vertical elements
- Seamless, no joints
Technical data
| Chemical base | Bitumen-rubber (polymer-filled) |
|---|---|
| Packaging | 20 kg pail |
| Colour | Brown (black when dry) |
| Density | ~1.05 kg/L |
| Solids content | ~69 % |
| Watertightness | W2A (EN 15814) |
| Consumption | ~1.0–2.0 kg/m² per coat (min. ~3.0 kg/m²) |
Areas of use
- Foundation and basement walls
- Below-ground structures
- Horizontal and vertical surfaces
Product group 05 · 13 products
Liquid roofing membranes
Sika liquid roofing membranes provide seamless waterproofing on roofs, balconies, terraces and detailed surfaces, and are UV-resistant, flexible and durable. A wide range based on polyurethane, polyurea, acrylic and bitumen.
Sikalastic®-612 · Sikalastic®-625 N · Sikalastic®-629 MS · Sikalastic® M 640 · Sikalastic®-629 T · SikaFill®-90 MP · Sikalastic® M 800 · Sikalastic®-770 BC · Sikalastic® 835 I · Sikalastic® 859 R ME · Sikalastic®-330 TR · Sikalastic®-685 · Sikalastic®-680
Sikalastic®-612
Single-Component, Economical Polyurethane Liquid Membrane
Key features
- Easy to apply
- Stays flexible at low temperatures
- Economical solution
- Cold-applied – no flame needed
Technical data
| Tensile strength | ~4.5 N/mm² (unreinforced) |
|---|---|
| Elongation at break | ~180 % |
| Service temperature | -20 °C / +80 °C |
| Total consumption | ~0.7–2.0 L/m² |
| Primer | Normally none on cementitious substrates / Sika Concrete Primer if needed |
Sikalastic®-625 N
High-Performance Polyurethane Liquid Membrane
Key features
- High elasticity
- Good UV resistance and colour stability
- Suitable for areas with foot traffic
- Flexible at low temperatures
Technical data
| Tensile strength | ~6 N/mm² (unreinforced) / ~13 N/mm² (reinforced) |
|---|---|
| Elongation at break | ~450 % (unreinforced) |
| Service temperature | -20 °C / +80 °C |
| System consumption | ~1.0 + 1.0 L/m² (reinforced) |
| Primer | Sika Concrete Primer / Sikalastic Metal Primer |
Areas of use
- Flat and pitched roofs
- Metal roofs
- Terraces and walkways
- Details and repairs
Sikalastic®-629 MS
Single-Component, UV-Resistant, Solvent- and Isocyanate-Free Roofing Membrane
Key features
- Solvent- and isocyanate-free
- Seamless membrane
- Vapour-permeable
- Easy to use, ready to apply
Technical data
| Tensile strength | ~2.0 N/mm² |
|---|---|
| Elongation at break | ~500 % |
| Total consumption | 2.0–2.2 kg/m² |
| Full performance | ~7 days |
| Primer | Usually none on cementitious substrates / Concrete Primer if porous |
Areas of use
- Roofs
- Balconies and terraces
- Complex details and penetrations
- Refurbishment of worn-out roofs
Sikalastic® M 640
Cost-Effective, Single-Component Polyurethane Liquid Membrane
Key features
- High elasticity and flexibility
- Crack bridging at low temperatures
- Cold-applied – no heat or flame needed
- Vapour-permeable
Technical data
| Tensile strength | > 6 N/mm² |
|---|---|
| Elongation at break | ~600 % |
| Service temperature | -20 °C / +90 °C |
| Consumption | ~1.5–2.0 kg/m² |
| Primer | Sikalastic-1C Primer PU / Concrete Primer / Metal Primer |
Areas of use
- Roofs, balconies and terraces
- Penetrations, drains and details
- Refurbishment of existing roofs
- Concrete, bitumen, metal and timber substrates
Sikalastic®-629 T
UV-Resistant, Transparent, Waterproof Protective Coating
Key features
- Fully transparent, glossy finish
- Waterproof
- Excellent UV resistance
- Suitable for foot traffic
Technical data
| Shore D hardness | 40 |
|---|---|
| Elongation | ~300 % |
| Service temperature | -30 °C / +80 °C |
| Consumption | ~0.4 L/m² per coat |
| System | Primer + 2 coats of 629 T |
Areas of use
- Ceramic tile surfaces
- Natural stone surfaces
- Verandas and balconies
- Terraces
SikaFill®-90 MP
Elastic Acrylic Waterproofing Coating
Key features
- Water-based, single-component
- High elasticity
- UV-resistant
- Easy application, low odour
- Bridges micro-cracks
Technical data
| Tensile strength | ≥ 10 kg/cm² |
|---|---|
| Elongation at break | ~280 % |
| Service temperature | -10 °C / +80 °C |
| Water vapour permeability | D = 5 m (Class I) |
| Consumption | ~1.0–2.0 kg/m² (2 coats) |
Areas of use
- Roofs, terraces and balconies
- Vertical surfaces and walls
- Joints, cracks and junctions
- Roof tile and zinc gutter repairs
Sikalastic® M 800
Spray-Applied Polyurethane Membrane (2-Component)
Key features
- Very fast curing (~15 s)
- High-speed spray application
- Seamless and fully bonded
- High elasticity and crack bridging
- Resistant to root penetration
Technical data
| Tensile strength | ~16 MPa |
|---|---|
| Elongation at break | ~300 % |
| Service temperature | +20 °C / +80 °C |
| Shore A hardness | ~70 |
| Consumption | ~2.0 kg/m² (2 coats) |
Areas of use
- Flat roofs and walkways
- Tunnel, bridge and car park decks
- Inverted and green roof systems
- Hydraulic structures
Sikalastic®-770 BC
Polyurea-Based Cold-Applied Liquid Membrane
Key features
- Cold-applied (roller, brush or spray)
- High elasticity, abrasion and chemical resistance
- Resistant to root penetration
- High mechanical strength
Technical data
| Tensile strength | ~8 MPa |
|---|---|
| Elongation at break | ~500 % |
| Service temperature | -20 °C / +90 °C |
| Shore A hardness | ~48 |
| Consumption | ~1.5–2.0 kg/m² (2 mm DFT) |
Areas of use
- Bridge and tunnel decks
- Car parks, ramps and roads
- Tunnels and viaducts
- Water tanks, dams and channels
- Industrial floors
Sikalastic® 835 I
100% Pure Polyurea Membrane (2-Component)
Key features
- Very fast curing (~10 s)
- High mechanical, abrasion and chemical resistance
- Resistant to root penetration
- Performs across a wide temperature range
Technical data
| Tensile strength | ~15–20 MPa |
|---|---|
| Elongation at break | ~340–370 % |
| Service temperature | -30 °C / +140 °C |
| Shore D hardness | ~46 |
| Consumption | ~2.0 kg/m² (2 mm DFT) |
Areas of use
- Bridge and tunnel decks
- Car parks, ramps and roads
- Water tanks, dams and channels
- Concrete structures, tunnels and bridges
Sikalastic® 859 R ME
Hybrid Polyurea Membrane (2-Component)
Key features
- Fast spray application
- Fast curing
- High elasticity and crack bridging
- Needs a protective top coat where exposed to UV
- Strong adhesion to most substrates
Technical data
| Tensile strength | ~16 MPa |
|---|---|
| Elongation at break | ~300 % |
| Service temperature | -30 °C / +140 °C |
| Shore A hardness | ~95 |
| Consumption | ~1.6–1.8 kg/m² (1 coat) |
Areas of use
- Flat and pitched roofs
- Podium and under-landscape systems
- Car parks and ramps
- Concrete structures, tunnels and bridges
Sikalastic®-330 TR
Economical Two-Component Bitumen/Polyurethane Membrane
Key features
- Cold-applied
- Good adhesion to cold substrates
- Vapour-permeable
- Fast curing
- Can be reinforced where needed
- Seamless membrane
Technical data
| Packaging | 15 kg A + 15 kg B = 30 kg set |
|---|---|
| Colour | Black |
| Mixed density | ~1.00 kg/L |
| Solids content | ~85–90 % |
| Tensile strength | > 2.5 N/mm² |
| Elongation at break | > 1500 % |
| Consumption | Base + top coat 0.75–1.00 kg/m² |
Areas of use
- New-build and refurbishment projects
- Roofs
- Balconies and terraces
- Complex detailed surfaces
Sikalastic®-685
UV-Resistant Bituminous Liquid-Applied Membrane
Key features
- Single-component, ready to use
- UV-resistant
- Suitable for light foot traffic
- Good crack bridging
- Fully bonded waterproofing
- Can be used under tile systems
Technical data
| Packaging | 5 / 10 / 20 kg pail |
|---|---|
| Colour | Grey, black, brown |
| Density | 1.50 ± 0.05 kg/L |
| Tensile strength | > 1.5 N/mm² |
| Elongation at break | > 140 % |
| Consumption | 1.5–1.8 kg/m² per coat (unreinforced) |
| Layer thickness | 2.5–3 mm |
Areas of use
- Exposed flat and pitched roofs
- External balconies and overhangs
- Parapet walls and copings
- Bituminous membrane laps and joints
Sikalastic®-680
Liquid Roof Waterproofing Membrane
Key features
- Suitable for roofs, balconies and terraces
- Provides seamless waterproofing
- Flexible membrane
- Easy application
- Suitable for outdoor use
Technical data
| Packaging | 5 / 10 / 20 kg pail |
|---|---|
| Colour | Grey, black, brown |
| Density | 1.50 ± 0.05 kg/L |
| Tensile strength | > 1.5 N/mm² |
| Elongation at break | > 140 % |
| Consumption | 1.5–1.8 kg/m² per coat (unreinforced) |
| Layer thickness | 2.5–3 mm |
Areas of use
- Roof systems
- Balconies and terraces
- Detailed junctions
- Outdoor waterproofing
Product group 06 · 6 products
Wet-area waterproofing
Protect the wet areas of your buildings against moisture, water and salts for the long term with Sika’s high-performance cementitious and acrylic waterproofing products.
SikaTop®-107 Elastik · SikaTop® WP 666 · SikaTop® WP 667 · SikaTop® 525 Seal · SikaTop® 582 Seal · SikaTop® 589 Seal
SikaTop®-107 Elastik
Cement-Based, Elastic Water and Damp Proofing
Key features
- High elasticity
- Protects against shrinkage cracks
- UV-resistant
- Resistant to freeze-thaw and salts
- Two-component, cement-based
Technical data
| Mixing ratio (A:B) | 1:2 (fluid) / 1:2.5 (plastic) |
|---|---|
| Number of coats | At least 2 |
| Total thickness | 0.75–1.5 mm per layer, total ~1.5–2.0 mm |
| Packaging | 15 kg set (A 5 kg + B 10 kg) / 30 kg set (A 10 kg + B 20 kg) |
| Consumption | ~1.7 kg/m²/mm |
| Shelf life | 12 months |
Areas of use
- Bathrooms and showers
- Terraces and balconies
- Swimming pools
- Water tanks
SikaTop® WP 666
Cement and Acrylic-Based Two-Component Waterproofing
Key features
- Suitable for negative and positive side application
- Flexible – bridges non-moving cracks
- High watertightness
- Vapour-permeable
- Indoor and outdoor use
Technical data
| Mixing ratio (A:B) | 2:1 by weight |
|---|---|
| Number of coats | At least 2 |
| Total thickness | 1.5–2.0 mm |
| Packaging | 30 kg set (A 20 kg bag + B 10 kg drum) |
| Consumption | ~1.7 kg/m²/mm |
| Shelf life | 12 months |
Areas of use
- Foundations and basements
- Retaining walls
- Terraces and balconies
- Water tanks
SikaTop® WP 667
Cement and Acrylic-Based Two-Component Waterproofing
Key features
- Vertical and horizontal application, indoors and outdoors
- Excellent waterproofing in wet areas
- Vapour-permeable
- Applied by brush or spray
Technical data
| Mixing ratio (A:B) | 4:1 by weight |
|---|---|
| Number of coats | At least 2 |
| Total thickness | 1.5–2.0 mm |
| Packaging | 25 kg set (A 20 kg bag + B 5 kg pail) |
| Consumption | ~1.7 kg/m²/mm |
| Shelf life | 12 months |
SikaTop® 525 Seal
Cement and Acrylic-Based Two-Component Waterproofing
Key features
- Indoor and outdoor use
- UV-resistant
- Vapour-permeable
- Resistant to freeze-thaw cycles
Technical data
| Mixing ratio (A:B) | 2:1 by weight |
|---|---|
| Number of coats | At least 2 |
| Total thickness | 1.5–2.0 mm |
| Packaging | 33 kg set (A 25 kg bag + B 8 kg can) |
| Consumption | ~1.7 kg/m²/mm |
| Shelf life | 12 months |
SikaTop® 582 Seal
Negative/Positive-Side Cement/Acrylic Waterproofing Coating
Key features
- Suitable for negative and positive side application
- High adhesion and local effect
- Vapour-permeable
- Protects concrete from water, carbonation and salts
- Can be used in drinking water tanks
Technical data
| Mixing ratio (A:B) | 4:1 by weight |
|---|---|
| Number of coats | At least 2 |
| Total thickness | 1.5–2.0 mm |
| Packaging | 25 kg set (A 20 kg bag + B 5 kg pail) |
| Consumption | ~1.7 kg/m²/mm |
| Shelf life | 12 months |
SikaTop® 589 Seal
Negative/Positive-Side Flexible Cement/Acrylic Waterproofing Coating
Key features
- Flexible, crack-bridging
- Vapour-permeable
- Resistant to freeze-thaw cycles
- Lasting waterproofing through high adhesion
- Suitable for vertical and horizontal application
Technical data
| Mixing ratio (A:B) | 4:1 by weight |
|---|---|
| Number of coats | At least 2 |
| Total thickness | 1.5–2.0 mm |
| Packaging | 25 kg set (A 20 kg bag + B 5 kg pail) |
| Consumption | ~1.7 kg/m²/mm |
| Shelf life | 12 months |
Product group 07 · 6 products
Injection products
Professional Sika solutions for stopping water, permanent waterproofing, and crack and void injection. Polyurethane and epoxy-based injection resins.
SikaInject®-102 · SikaInject®-104 · Sika® Injection-105 RC · SikaInject®-107 DE · Sika® Injection-201 CE · Sikadur®-52 TR
SikaInject®-102
Polyurethane Injection Resin for Water Stopping
Key features
- Reacts with water to form a strong foam
- Foam factor up to 75×
- Injectable with 1-C pumps
- Can be accelerated with up to 10% catalyst
Technical data
| Packaging | 22 kg / 10 kg resin + 2.2 kg Cat |
|---|---|
| Chemical base | Water-reactive PU resin |
| Viscosity | ~230 mPa·s |
| Temperature | +5 °C / +35 °C |
Areas of use
- Stopping running water
- Crack and joint injection
- Below-ground structures
SikaInject®-104
Fast-Reacting, Rigid Polyurethane 2K Foam Resin
Key features
- Void filling and stabilisation
- Sealing large joints and penetrations
- Fast foam development
- Thermal insulation properties
Technical data
| Packaging | A 19 kg / B 22 kg |
|---|---|
| Mixing ratio | 1:1 by volume |
| Compressive strength | ~2.0 N/mm² |
| Expansion | 13–15× |
| Reaction | start ~20 s / end ~45 s |
Areas of use
- Void filling and stabilisation
- Sealing large joints
- Soil stabilisation
Sika® Injection-105 RC
Elastic PUR Injection Foam for Waterproofing
Key features
- Temporarily stops heavy water leaks
- Forms a dense, elastic structure after curing
- Water-activated PUR system
- Can be accelerated with AC10 in cold weather
Technical data
| Packaging | A 10/20 kg, B 11/22 kg |
|---|---|
| Mixing ratio | 1:1 by volume |
| Expansion | ~15× |
| Reaction | start ~20 s / end ~80 s |
Areas of use
- Stopping heavy water leaks
- Crack injection
- Temporary water cut-off
SikaInject®-107 DE
Single-Component PU Injection Resin for Permanent Waterproofing
Key features
- Suitable for stopping running water
- Forms a strong, closed-cell, flexible foam
- Permanently elastic, absorbs limited movement
- Applied with 1-C pumps
Technical data
| Packaging | 21 kg / 10 kg |
|---|---|
| Chemical base | Single-component PU resin |
| Expansion | ~30× |
| Reaction | start ~20 s / end ~120 s |
| Density | ~1.1 kg/L |
Areas of use
- Stopping running water
- Permanent waterproofing
- Crack and joint injection
Sika® Injection-201 CE
Elastic PUR Injection Resin for Permanent Waterproofing
Key features
- Permanently elastic, accommodates limited movement
- Low viscosity, penetrates fine cracks
- Solvent-free
- Can be accelerated with AC20 in cold weather
Technical data
| Packaging | A 10/20 kg, B 10.6/21.2 kg |
|---|---|
| Mixing ratio | 1:1 by volume |
| Viscosity | ~100 mPa·s |
| Elongation | ~35 % |
| Temperature | +5 °C / +35 °C |
Areas of use
- Fine crack injection
- Permanent elastic waterproofing
- Joint repair
Sikadur®-52 TR
Low-Viscosity Epoxy Injection Resin
Key features
- Bonds to concrete, mortar, stone, steel and timber
- Solvent-free
- Can be applied in dry and damp conditions
- High mechanical and bond strength
Technical data
| Packaging | 3 kg set |
|---|---|
| Mixing ratio | A:B = 2:1 |
| Compressive strength | 52 N/mm² |
| Tensile strength | 37 N/mm² |
| Pot life | ~25 min (+23 °C) |
Areas of use
- Structural crack injection
- Monolithic bonding
- Concrete, steel and timber repair
Product group 08 · 7 products
Floor coatings
Sika epoxy and polyurethane-concrete floor systems offer high mechanical and chemical resistance, abrasion resistance and hygienic surfaces. Reliable, lasting performance from industrial plants to food facilities.
Sikafloor®-151 · Sikafloor®-263 SL · Sikafloor®-264 Thixo · Sikafloor®-264 · Sika® Ucrete® MF · Sika® Ucrete® MF 40 AS · Sika® Ucrete® UD 200
Sikafloor®-151
Epoxy Primer, Levelling Mortar and Mortar Screed
Key features
- Low viscosity
- Good penetration
- Multi-purpose
- Easy application
- Short waiting times between coats
Technical data
| Mixed density | ~1.47 kg/L |
|---|---|
| Solids content | ~100 % |
| Pot life (+20 °C) | ~25 min |
| Application temperature | +10 °C / +30 °C |
| Consumption (primer) | 0.3–0.5 kg/m² |
| Consumption (mortar) | 2–2.2 kg/m² |
Areas of use
- Priming concrete and cementitious substrates
- Self-levelling floors
- Levelling mortars
- Epoxy mortar and repair work
Sikafloor®-263 SL
Self-Levelling Epoxy Coating
Key features
- Self-levelling
- High mechanical and chemical resistance
- Glossy, non-porous surface
- Withstands wear
- Easy application
Technical data
| Mixed density | ~1.64 kg/L |
|---|---|
| Solids content | ~100 % |
| Pot life (+20 °C) | ~25 min |
| Application temperature | +10 °C / +30 °C |
| Waiting time between coats | 24 hours – 2 days |
| Consumption | 0.9–1.2 kg/m² |
Areas of use
- Warehouses and production areas
- Car parks and ramps
- Food and beverage industry
- Wet process areas
Sikafloor®-264 Thixo
Textured Epoxy Top Coat
Key features
- Roller-applied, thixotropic
- Slip-resistant, textured surface
- Chemical and mechanical resistance
- Glossy surface
Technical data
| Mixed density | ~1.40 kg/L |
|---|---|
| Solids content | ~100 % |
| Pot life (+20 °C) | ~25 min |
| Application temperature | +10 °C / +30 °C |
| Waiting time between coats | 24 hours – 2 days |
| Consumption | 0.5–0.8 kg/m² |
Areas of use
- Car parks and ramps
- Industrial floors
- Areas that need slip resistance
- Storage and maintenance areas
Sikafloor®-264
Smooth Epoxy Top Coat
Key features
- Roller-applied
- Smooth, glossy surface
- Chemical and mechanical resistance
- Easy to clean
- Wide colour range
Technical data
| Mixed density | ~1.40 kg/L |
|---|---|
| Solids content | ~100 % |
| Pot life (+20 °C) | ~25 min |
| Application temperature | +10 °C / +30 °C |
| Waiting time between coats | 24 hours – 2 days |
| Consumption | 0.25–0.3 kg/m² |
Areas of use
- Warehouses and production areas
- Food and beverage industry
- Laboratories
- Clean, attractive floors
Sika® Ucrete® MF
Smooth Heavy-Duty Polyurethane Flooring
Key features
- High mechanical strength
- Chemical resistance
- Thermal resistance
- Liquid-tight
- Fast cure and return to service
Technical data
| Mixed density | ~1.97 kg/L |
|---|---|
| Compressive strength | 50 N/mm² |
| Flexural tensile strength | 20 N/mm² |
| Service temperature | -15 °C / +70 °C |
| Consumption (4 mm) | 8–10 kg/m² |
| Layer thickness | ~4–6 mm |
Areas of use
- Chemical and process plants
- Clean rooms
- Dry packing lines
- Warehouses
Sika® Ucrete® MF 40 AS
Antistatic Heavy-Duty Polyurethane Flooring
Key features
- Antistatic
- High mechanical and chemical resistance
- Hygienic surface
- Fast cure
- Thermal shock resistance
Technical data
| Mixed density | ~1.97 kg/L |
|---|---|
| Compressive strength | 50 N/mm² |
| Electrostatic resistance | Rg < 1×10⁹ Ω |
| Body voltage | < 100 V |
| Service temperature | -15 °C / +70 °C |
| Consumption (4 mm) | 8–10 kg/m² |
Areas of use
- Food and beverage plants
- Pharmaceutical plants
- Electronics plants and data centres
- Defence facilities
Sika® Ucrete® UD 200
Slip-Resistant Heavy-Duty Polyurethane Flooring
Key features
- Slip-resistant, lightly textured surface
- High mechanical and thermal resistance
- Wide service temperature range
- Hygienic and easy to clean
Technical data
| Mixed density | ~2.09 kg/L |
|---|---|
| Compressive strength | 55 N/mm² |
| Flexural tensile strength | 14 N/mm² |
| Slip resistance | R11 / PTV 40-45 |
| Service temperature | -40 °C / +150 °C |
| Consumption (6 mm) | 13–16 kg/m² |
| Layer thickness | ~6–12 mm |
Areas of use
- Food and beverage plants
- Pharmaceutical plants
- Chemical and process plants
- Production plants and workshops
Product group 09 · 4 products
Chemical anchors
Safe, durable and long-lasting fixing with Sika’s high-performance anchoring products. Polyester, acrylate and epoxy-based chemical anchor systems.
Sika® AnchorFix®-1 · Sika® AnchorFix®-2+ · Sika® AnchorFix®-S · Sika® AnchorFix®-3030
Sika® AnchorFix®-1
Fast-Curing Anchoring Adhesive
Key features
- Polyester-based, two-component
- Fast curing
- Usable at low temperatures
- High load-bearing capacity
- No sag in overhead applications
- Styrene-free, low odour
Technical data
| Packaging | 150 / 300 / 550 ml |
|---|---|
| Colour | Light grey |
| Compressive strength | ~60 N/mm² |
| Mixing ratio | 10:1 |
| Service temperature | Long-term +50 °C / short-term +80 °C |
| Ambient temperature | -10 °C / +40 °C |
Areas of use
- Light to medium-load anchoring
- Railing and profile fixing
- General fixing work
Sika® AnchorFix®-2+
Anchoring Adhesive for Medium and Heavy Loads
Key features
- Epoxy acrylate-based, two-component
- Fast curing
- High load-bearing capacity
- ETA approved
- Suitable for cracked concrete
- Drinking water certified
Technical data
| Packaging | 300 / 550 / 850 ml |
|---|---|
| Colour | Grey |
| Compressive strength | ~70 N/mm² |
| Mixing ratio | 10:1 |
| Service temperature | Long-term +50 °C / short-term +80 °C |
| Product temperature | +5 °C / +30 °C |
Areas of use
- Medium to heavy-load anchoring
- Cracked concrete applications
- Rebar connections
Sika® AnchorFix®-S
General-Purpose Anchoring Adhesive
Key features
- Polyester-based, two-component
- Fast curing
- No sag in overhead applications
- ETA approved
- Low strength loss
Technical data
| Packaging | 300 / 380 ml |
|---|---|
| Colour | Light grey |
| Compressive strength | ~74 N/mm² |
| Mixing ratio | 10:1 |
| Heat resistance | Long-term +50 °C / short-term +80 °C |
| Ambient temperature | +5 °C / +40 °C |
Areas of use
- General-purpose anchoring
- Profile and bracket fixing
- Light to medium-load applications
Sika® AnchorFix®-3030
High-Performance Professional Epoxy Anchoring Adhesive
Key features
- Epoxy resin-based
- Suitable for cracked and non-cracked concrete
- High load-bearing capacity
- ETA approved
- Seismically tested (C1 & C2)
- No shrinkage during curing
Technical data
| Packaging | 300 / 385 / 585 ml |
|---|---|
| Colour | Light grey |
| Compressive strength | ~95 N/mm² |
| Mixing ratio | 3:1 |
| Service temperature | -40 °C / +50 °C (short-term +70 °C) |
| Ambient temperature | +5 °C / +40 °C |
Areas of use
- Heavy-load and seismic anchoring
- Post-installed rebar
- Structural steel fixing
Product group 10 · 6 products
Adhesives and joint sealants
Sika adhesives and joint sealants meet the sealing and bonding needs of different building elements indoors and outdoors. Reliable solutions with high movement capability, easy application and excellent adhesion.
Sikaflex®-415 Universal · Sikaflex®-175 FC PU · Sikaflex®-440 · Sikaflex® PRO-3 · Sikaflex®-11 FC Purform® · Sikaflex® Construction Purform®
Sikaflex®-415 Universal
Polyurethane Joint Sealant and General-Purpose Adhesive
Key features
- High movement capability
- Excellent adhesion to many building materials
- Waterproof
- Resistant to UV and weathering
- Easy gun application
Technical data
| Movement capability | ± 25 % |
|---|---|
| Shore A hardness | ~25–40 |
| Curing rate | ~3 mm / 24 h |
| Service temperature | -40 °C / +70 °C |
| Skin time | ~40–60 min |
| Colours | Black, white, grey, brown, aluminium grey, limestone |
Areas of use
- Floor and wall joints
- Bonding concrete, brick, metal, glass and timber
- Car parks and warehouses
- Precast element joints
- Window and door perimeters
Sikaflex®-175 FC PU
Fast-Curing, Single-Component Polyurethane Joint Sealant
Key features
- Fast curing
- Single-component
- High movement capability
- Flexible and durable
- Indoor and outdoor applications
Technical data
| Movement capability | ± 25 % |
|---|---|
| Shore A hardness | ~35–40 |
| Curing rate | ~3 mm / 24 h |
| Service temperature | -40 °C / +70 °C |
| Skin time | ~40 min |
| Colours | Black, white, grey, red, champagne |
Areas of use
- Automotive and caravan industry
- Ventilation and HVAC ducts
- Gutter and pipe connections
- Sheet metal joints and sealing
- Concrete joints
Sikaflex®-440
Polyurethane-Based, Single-Component Elastic Joint Sealant
Key features
- Polyurethane-based, single-component
- Elastic and durable
- High movement capability
- Indoor and outdoor use
- Easy application
Technical data
| Movement capability | ± 25 % |
|---|---|
| Shore A hardness | ~25–30 |
| Curing rate | ~3 mm / 24 h |
| Service temperature | -40 °C / +70 °C |
| Skin time | ~50 min |
| Colours | Black, white, grey, limestone, aluminium grey, brown |
Areas of use
- Concrete and precast joints
- Window and door perimeters
- Façade element joints
- External façade joints
Sikaflex® PRO-3
High-Performance Polyurethane Joint Sealant
Key features
- High performance
- Resistant to heavy vehicle traffic
- High movement capability
- Chemical and mechanical resistance
- Low shrinkage
Technical data
| Movement capability | ± 25 % (EN ISO 9047) / ± 50 % (ASTM C719) |
|---|---|
| Shore A hardness | ~28 |
| Curing rate | ~3.5 mm / 24 h |
| Service temperature | -40 °C / +80 °C |
| Skin time | ~100 min |
| Colours | Concrete grey, black |
Areas of use
- Floor joints (heavy vehicle traffic)
- Warehouses, production and food plants
- Wastewater treatment plants
- Tunnel and bridge joints
- Car park decks
Sikaflex®-11 FC Purform®
Elastic Joint Sealant and Multi-Purpose Adhesive
Key features
- High movement capability
- Multi-purpose bonding and sealing
- Low VOC – environmentally friendly
- Indoor and outdoor applications
- Strong adhesion to many substrates
Technical data
| Movement capability | ± 25 % |
|---|---|
| Shore A hardness | ~20 |
| Curing rate | ~3 mm / 24 h |
| Service temperature | -40 °C / +70 °C |
| Skin time | ~50 min |
| Colours | White, black, grey, brown, beige |
Areas of use
- Window and door perimeters
- Façade and building joints
- Bonding concrete, brick, metal, timber and glass
- Precast element joints
Sikaflex® Construction Purform®
Low-Modulus Joint Sealant for Concrete and Masonry Façades
Key features
- Single-component, non-sag elastic polyurethane
- High movement capability
- Low modulus – low stress on the substrate
- Good weathering resistance
- Good adhesion to many construction materials
Technical data
| Movement capability | ± 25 % (EN ISO 9047) / ± 50 % (ASTM C719) |
|---|---|
| Shore A hardness | > 20 |
| Tensile strength | 0.96 MPa |
| Elastic recovery | 90 % |
| Curing rate | ~3 mm / 24 h |
| Skin time | ~60 min |
| Service temperature | -40 °C / +70 °C |
| Packaging | 300 ml cartridge / 600 ml foil pack |
Areas of use
- Around window and door frames
- Façade elements
- Precast element joints
- EIFS (externally insulated) façades
No product matches your search. If the product you need is not in the catalogue, just ask: message us on WhatsApp.
Projects from this service line
Frequently asked questions
Where can I buy Sika products in Samsun?
Zahan İnşaat is an authorised Sika® dealer in Samsun. The sales office is at Esenevler Mahallesi 406. Sokak No: 5/A, Atakum / Samsun. For stock, prices and delivery, call +90 544 871 81 33 or message us on WhatsApp.
Can I just buy the product, or is installation compulsory?
You can buy the product independently of installation. For contractors working with their own crews we supply materials and technical data sheets only; on request we also provide site support for the first application.
Which provinces do you deliver to?
Same day within Samsun; usually next day to Ordu, Amasya, Tokat, Sinop, Çorum and Giresun. Delivery to other provinces of Türkiye is possible by courier and freight.
I do not know which product suits my project — can you help?
Yes, and that is the real part of the job. We assess the existing condition from detail drawings, photographs or a site visit, and recommend a system according to the direction of the water, the surface condition, the temperature and the traffic load. The recommendation is given in writing together with the consumption calculation.
Which Sika product groups do you sell?
Our catalogue lists 62 products in 10 groups: repair mortars, grouts and epoxy grouts, bituminous waterproofing membranes, bitumen-based waterproofing coatings, liquid roofing membranes, wet-area waterproofing, injection resins, floor coatings, chemical anchors, and adhesives and joint sealants.
Which Sika product is used to waterproof bathrooms and wet areas?
For bathrooms, showers and balconies the cement-based elastic SikaTop®-107 Elastik and SikaTop® WP 667 are the usual choices; for spas, hammams and pools the flexible SikaTop® 589 Seal is used. They are applied in at least two coats to a total thickness of 1.5–2.0 mm, with a consumption of about 1.7 kg/m² per mm.
What is the difference between R3 and R4 repair mortars?
EN 1504-3 divides repair mortars into four classes: R4 and R3 are for structural repair, R2 and R1 for non-structural repair. Compressive strength is at least 45 MPa for R4 and at least 25 MPa for R3. For load-bearing elements such as columns and beams, R4 mortars are chosen, such as Sika MonoTop®-612 (5–30 mm in one layer) or SikaEmaco® S 488 for thick layers (10–50 mm). Sika MonoTop®-620 is an R3 mortar for 1.5–5 mm levelling and finishing coats, and SikaEmaco® N 600 is an R1 mortar for non-structural surface repairs.
Which chemical anchor should I use for rebar connections and heavy loads?
For heavy loads, seismic anchoring and post-installed rebar, the epoxy-based Sika® AnchorFix®-3030 is used; it is ETA approved and seismically tested to C1 and C2. Sika® AnchorFix®-2+ suits medium and heavy loads in cracked concrete, and the fast-curing Sika® AnchorFix®-1 suits light to medium-load railing and profile fixing.
Are the technical values on this page binding?
The technical data is for information and matches our printed catalogue. Check the current product data sheet before application; our sales office can provide the data sheet and help with product selection.
Quote
Get a price for Authorised Sika Dealer
Share the dimensions and the current condition and we will price it item by item. In Samsun and the surrounding provinces we come out for the survey ourselves.
The printed catalogue is in Turkish; product names and technical values are the same.
Sika®, Sikaflex®, Sikalastic®, SikaTop®, SikaGrout®, Sikadur®, Sikafloor®, Ucrete®, Igolflex®, AnchorFix® and related product names are registered trademarks of Sika AG. Technical data is for information only; refer to the current product data sheets for up-to-date values.